FrSky TD R6 6Ch Dual Band Receiver

Overview:

The FrSky Tandem TD R6 6 Channel dual-band receivers are unlike any other FrSky 2.4Ghz or 900Mhz receivers, they work simultaneously at both 900Mhz and 2.4Ghz frequencies. That means Tandem receivers provide not only the low latency signal and long range control, also benefits from enhanced level of high reliability and anti-interference performance.

The TD R6 receivers adopt the dual antenna design that provides multi-directional wide coverage for the remote signal. The 900Mhz antenna is a newly designed small form factor, but has the equivalent high-performance as with previous 900mhz antennas.

TD R6 receiver offers 6 PWM channel outputs and is bundled in a compact lightweight design, the receiver also provides two of 3-pin ports accordingly for SBUS Out and FBUS/S.Port. By setting the S.Port to the FBUS protocol, the TD receivers can open up the possibility of seamlessly pairing with multiple telemetry devices (Neuron ESC, Advance Sensors, etc.) as well as simplifying the build setup.

Features:

– Simultaneous working 2.4G&900M dual-band TD mode
– Dual-band antenna design for multi-directional coverage
– Compact lightweight design
– Black Box function
– 4ms race mode with telemetry
– Long control range (up to 50KM – 100KM)
– Over-The-Air (OTA) FW update
– 6 PWM channel ports
– FBUS / S.Port
– SBUS Out (Supports 16CH / 24CH mode)

Specifications:

– Frequency: 2.4GHz & 900MHz
– Dimension: 47.5*20.4*10.9mm (L*W*H)
– Weight: 11.5g
– Operating Voltage: 3.5-10V(recommend 3.7-8.4V)
– Operating Current: ≤110mA@5V
– Compatibility: TANDEM series radio & RF module in TD mode.
– 2.4G/900M antenna connector: IPEX1