IFlight BLITZ F7 Whoop 55A AIO (25.5mm)

Description:

The iFlight BLITZ AIO F7 Whoop 55A AIO flight controller features a powerful F722 processor and BMiI270 gyro. Onboard is a 55A BlueJay ESC. The BLITZ F7 55A AIO is compatible with both analogue video and DJI digital.

** WARNING: in line with the warranty the manufacturer offers us on these boards, we offer ZERO warranty once the board is soldered. We are happy to attempt a warranty claim but success is unlikely. Please keep that in mind when purchasing **

Features:

– Separated Flight Control board to minimize electrical gyro noise
– Pass-through DJI O3 and Caddx Vista/Polar Connector
– FC PCB can be disassembled from the ESC PCB; Repair allowed!
– MCU: BGA-STM32F745, 216MHz
– OSD: AT7456E
– Blackbox: 16MB Onboard Flash
– Gyro: DPS310

** Safety reminder: The DJI plug&play port has no voltage regulator (BEC) and is passing through VBAT. The Caddx Vista goes up to 26.4V (6S), the DJI Air Unit goes up to 17.6V (4S). You will also need to add extra capacitors to provide spike filtering and prevent the flight controller being destroyed **

FC Specifications:

– MCU: BGA-STM32F745
– Gyro: BMI270
– Blackbox: 16MB Onboard Flash
– BEC output: 5V 2.5A 
– WS2812 LED Strip: Yes
– Buzzer: Yes
– Barometer: DPS310
– Connector: Micro-USB
– OSD: IFLIGHT OSD (AT745E）
– FC Firmware：IFLIGHT_BLITZ_F7_AIO
– Mounting pattern: 25.5*25.5mm φ3mm
– Dimensions: 32.5*32.5mm
– Weight: 8.5g 
– BEC: 5V 2A / 3A
– Input voltage: 2-6S, support LIHV battery
– Smartaudio / IRC Tramp VTX protocol supported

ESC Specifications:

– ESC MCU: BB21
– Driver: FD6288
– Input voltage: 2-6S Support LIHV battery
– Output current: 55A, peak value 65A (10 seconds)
– ESC firmware: Q-H-40 – Bluejay, 0.16, 24kHz
– Current sensor: ratio 200 (1/10mV/A)
– BEC: NO
– ESC Telemetry: NO
– Bidirectional DShot: Yes(need to use Bluejay firmware)
– Supports DShot DShot150/300/600/MultiShot/ OneShot etc.

Includes:

– iFlight BLITZ F7 Whoop 55A AIO (25.5mm)
– Accessories (JST Wires, Silicone Grommets)