IFlight BLITZ Mini F7 Flight Controller (20mm)

Description:

The iFlight BLITZ Mini F7 flight controller features a powerful F722 processor and BMI270 gyro. The BLITZ mini F7 is compatible with both analogue video and DJI digital. The flight controller some useful LED lights to aid in diagnostics/debugging. The FC has 20x20mm mounting holes.

** WARNING: in line with the warranty the manufacturer offers us on these boards, we offer ZERO warranty once the board is soldered. We are happy to attempt a warranty claim but success is unlikely. Please keep that in mind when purchasing **

Features:

– Improved circuit design, better components and lower electrical noise!
– DJI HD VTX Connector (Plug-and-Play / No soldering required)
– FC indicator LEDs for visual debugging

** Safety reminder: The DJI plug&play port has no voltage regulator (BEC) and is passing through VBAT. The Caddx Vista goes up to 26.4V (6S), the DJI Air Unit goes up to 17.6V (4S). You will also need to add extra capacitors to provide spike filtering and prevent the flight controller being destroyed **

FC Specifications:

– MCU:   STM32 F722
– Gyro:   BMI270
– Barometer:  DPS310
– OSD Chip:   AT7456
– Flash:   16MB (Blackbox flash)
– UARTS:   6
– Motor outputs:   4x (SH1.0 connector)
– I2C serial:   SDA / SLA pads
– Smartaudio / IRC Tramp VTX protocol supported
– LED controller:   Yes
– Beeper pad:   Yes
– Firmware target:   IFRC-IFLIGHT_BLITZ_F722
– Mount pattern:   20×20 mm / 4mm PCB hole diameter, silicon grommets for M3 screws
– Dimensions:   30.5×27 mm
– Weight:   5g

Includes:

– iFlight BLITZ F7 Flight Controller V1.1
– Accessories (JST Wires, Silicone Grommets)