Matek F405-VTOL Flight Controller

Original price was: $59.95.Current price is: $41.97.

Quick responses, top-notch service.

Quality You Can Count On

Nature-friendly materials, for a better planet.

Efficiency meets excellence in customer care.

Overview:

The Matek F405-VTOL is a flight controller optimised for VTOL usage. The PDB includes 5 seperate motor/esc soldering points and the board has room for ~6 servos. INAV and ardupilot software are both supported. The F405-VTOL has a variety of onboard BECs for use with both servos and accessories. The board includes 6x UARTS, so a variety of accessories can be connected.

Specifications:

– MCU: STM32F405RGT6, 168MHz , 1MB Flash
– IMU: ICM42688-P
– Baro: SPL06-001
– OSD: AT7456E
– Blackbox: MicroSD card slot
– 6x UARTs, 1x Softserial_Tx option(INAV)
– 12x PWM outputs
– 1x I2C
– 4x ADC (VBAT, Current, RSSI, Airspeed)
– 1x spare PINIO
– USB/Beep Extender with Type-C(USB2.0)
– Built in inverter on UART2-RX for SBUS input
– Switchable Dual Camera Input

PDB Specifications:
– Input voltage range: 6.8~30V (2~6S LiPo)
– Sense resistor: 100A continuous, 220A peak
– 5x ESC power pads, total 100A continuous
– Support continuous load of up to 100A on ESC pad near the current sensor resistor
– Support continuous load of up to 30A & peak of 50A on each ESC pad of Quadcopter
– Battery Voltage divider 1K:20K (Scale 2100 in INAV, BATT_VOLT_MULT 21.0 in ArduPilot)
– Current Senor: 220A, 3.3V ADC (Scale 150 in INAV, 66.7 A/V in ArduPilot)

BEC 5V output
– Designed for Flight controller, Receiver, OSD, Camera, Buzzer, 2812 LED_Strip, Buzzer, GPS module, AirSpeed
– Continuous current: 2 Amps

BEC 9V /12V output
– Designed for Video Transmitter, Camera, Gimbal ect.
– Continuous current: 2 Amps
– 12V option with Jumper pad
– for stable 9V/12V output, input voltage should > output voltage +1V

BEC Vx output
– Designed for Servos
– Voltage adjustable, 5V Default, 6V or 7.2V via jumper
– Continuous current: 8 Amps, 10A Peak
– for stable Vx output, input voltage should > Vx voltage +1V

BEC 3.3V output
– Designed for Baro / Compass module and external 3.3V peripherals
– Linear Regulator
– Continuous current: 200mA

Physical Specifications:
– Mounting: 25 x 25mm-Φ2mm, 35 x 35mm- Φ4mm
– Dimensions: 45 x 42 x 15mm
– Weight: 25g w/ USB/buzzer adapter

Included:
1x Matek F405-VTOL Flight controller
1x Accesories