ToolkitRC ST8 Advanced Servo Tester

Overview:

The ToolkitRC ST8 advanced servo tester allows upto 8 servos to be tested simultaneously over 4 independent output channels. 

Features:

– 4 channels of programmable independent signal, 8 channels of signal output, accuracy of 1 ms
– 4 independent current acquisition, respectively,curve display
– Multiple measurement modes (speed, count, step,linear)
– Output PWM signals with a period of 33to1000Hz
– A variety of signal trigger sources (internal, buttons,knobs, external sources)
– Measure the response speed of the steering gear with an accuracy of 1 millisecond
– The external input signal supports PWM/PPM/SBUS with an accuracy of 1 ms
– The external input signal supports PWM/PPM/SBUS with an accuracy of 1 ms
– Drive the servo with a maximum loadof 100W
– Multi-language system
– The device is simulated as a USB flashdrive allowing firmware upgrade

Specifications:

– 7.0-28.0V @MAX 10A
– 5.0V-28.0V@MAX 10A
– 5.0V-8.4V@MAX 4A/S1-S4
– 5.0V-8.4V@MAX 4A/S4 Ext.
– 100us-2900us@33-1000Hz @S1-S4
– PWM 500us-2500us@S5
– PPM 8CH@S5 SBUS 16CH@S5
– 1000us-2000us@P1
– [email protected]
– 2.4 inch TFT RGB 320*240 resolution
– 99mm*68mm*26mm
– 120g

Included:

– ToolkitRC ST8 Advanced Servo Tester