Walksnail Avatar HD VTX V2 (8GB)

Overview:

The Walksnail Avatar VTX V2 is a replacement module for the Avatar HD system. Module only, no antennas or camera included. This is the version 2 which includes 20x20mm mounting holes as well as 25x25mm. The PCB board is updated as well as the shell.

GyroFlow is NOT supported on the 8GB model.

Compatible with the Walksnail HD goggles or Fat Shark Dominator Avatar HD Goggles.

Avatar VTX V2 Specifications:
– Model    Avatar V2 module
– Communication Frequency    5.725-5.850GHz
– Transmitter Power (EIRP)    FCC:<30dBm;CE:<14dBm;SRRC:<20dBm;
– MIC:<25dBm
– I/O Interface    JST1.0*4(Power in)JST0.8*6(USB)
– Mounting Holes    25.5*25.5mm；20*20mm
– Dimensions    33*33*10.5mm
– Storage    8G
– Recording    1080P/720P
– Weight    17.6g
– Operating Temperature    -20-40℃
– Channels    8
– Wide Power Input    6V-25.2V
– Supported FC System    Betaflight; Inav; Fettec; ArduPilot;Kiss;
– OSD    Canvas mode
– Latency    Average delay 22ms
– Antenna    1(IPEX)

Included:
– 1x Walksnail Avatar HD VTX V2 (8GB)
– Accessories (Cable)